What a Trucking Company Website Needs
A trucking company website has two jobs. Shippers and brokers want to know which freight you haul, where and with what equipment, and how to get a quote. Drivers want to know the pay, the home time and the trucks, and how to apply. A good site gives each of them a clear path and backs it with numbers they can check.
The federal rules here come from the Federal Motor Carrier Safety Regulations, read in the official 2025 edition of the Code of Federal Regulations on govinfo: 49 CFR 391.21 (application for employment), 391.23 (investigations and inquiries), 390.32 (electronic documents and signatures), 390.21 (vehicle marking), 390.201 (registration) and 392.9a (operating authority). We also used FMCSA's SAFER Company Snapshot, the FTC's background checks guide for employers and Google's job posting documentation. All were checked on November 15, 2026. The rest is our view from building websites for service businesses. This is not legal advice; check the current rules with FMCSA or your adviser.
The short answer
Split the site into a shipper side and a driver side from the first screen. On the shipper side, list the freight you haul, your lanes and your equipment, and put a short quote form on every page. On the driver side, state pay, home time and requirements plainly and link to an application that collects what the federal rules ask for, over a secure connection. Show your legal name and your USDOT number (and MC number if you have one) as text, so anyone can look you up. Never show a number, rating or certificate you do not hold.
Two paths: shippers and drivers
Most visitors to a trucking site are either moving freight or looking for a driving job, and they want very different things. In our view the header should carry two clear buttons, such as "Get a quote" and "Drive for us", and the homepage should send each group to its own section within one click. Mixing driver pay into the freight pages, or burying the quote form under recruiting copy, loses both.
A staffing agency has the same two-sided problem; our guide to staffing agency websites shows how to keep employer and candidate paths apart.
Services, lanes and equipment
Shippers and brokers scan for fit. Give each service you really offer its own page or section, for example:
- Freight types: full truckload, less than truckload, dedicated, drayage, refrigerated, flatbed, hazardous materials. List only what you haul and are permitted to haul.
- Lanes and regions: the states, corridors or metro areas you run regularly, and whether you go local, regional or over the road.
- Equipment: trailer types and lengths, reefer units, tarps and securement, liftgates. Real photos of your own trucks do more than stock images.
- Who you work with: direct shippers, brokers, or both, and how to reach dispatch.
If you run regional lanes from a few terminals, a page per terminal with its address and phone helps local search; our guide to service-area pages covers how to do that without thin copies.
The quote request
A useful quote form asks for what drives your price and nothing more: pickup and delivery locations, ready date, freight type, weight and dimensions or pallet count, equipment needed, and any special handling such as temperature control or hazardous materials. Add a free-text field and a file upload for a bill of lading or load list, and say how quickly you reply. Our guide to form design covers field order and errors, and the one on file uploads covers safe handling of documents.
Many shippers would rather call. Put the dispatch or sales number in the header as a tap-to-call link and say when it is answered.
USDOT and MC numbers
Under 49 CFR 390.201, motor carriers, brokers and freight forwarders subject to the rules register with FMCSA to identify their operations for safety oversight and, where it applies, to obtain operating authority. Section 392.9a says a vehicle providing transportation that requires operating authority must not be operated "Without the required operating authority". Section 390.21 requires the carrier's name and its USDOT number on both sides of the truck, "readily legible, during daylight hours, from a distance of 50 feet".
We did not find a federal rule that requires a general freight carrier to show these numbers on its website. Household goods movers are different; see the USDOT rules in our moving company guide. Even so, in our view your legal name, USDOT number and MC number (if you have operating authority) belong in the footer and on the About page as plain text. FMCSA's SAFER Company Snapshot says "Users can search by DOT Number, MC/MX Number or Company Name", so a shipper or broker can check your registration and safety record in a minute. Use exactly the name and numbers on your FMCSA record, and do not claim a safety rating, insurance limit or certificate you cannot show.
The driver recruiting page
Drivers compare carriers on a few points, and a recruiting page that hides them sends people elsewhere. State, in plain text:
- The type of driving: local, regional or over the road, and team or solo.
- How pay works (per mile, per load, hourly or salary) and what is included. Use only figures you will honor.
- Home time, schedules and the equipment drivers will run.
- Requirements: license class, endorsements, experience, and anything else you check.
- Benefits you really offer, and who to call with questions.
Give each open position its own page so it can appear in Google's job search; our guide to careers pages covers job adverts and JobPosting structured data. Google's documentation says that "If the job is filled before the expiration date occurs", you should remove the posting, so keep the list current.
The driver application
Under 49 CFR 391.21 a driver may not drive a commercial motor vehicle for you until they have completed and given you an application for employment. The form is furnished by the carrier and "must be completed by the applicant, must be signed by him/her". It must contain, among other items:
- The carrier's name and address.
- The applicant's name, address, date of birth and social security number, and their addresses for the past 3 years.
- Each unexpired commercial driver's license or permit, with the issuing authority, number and expiration date.
- Driving experience, including the type of equipment operated.
- Accidents and moving violations in the past 3 years, and any license denial, revocation or suspension.
- Employers in the past 3 years, with dates, reasons for leaving and whether the job was covered by the FMCSRs and DOT drug and alcohol testing; for CDL drivers, commercial driving employers for the 7 years before that.
- A signed certification at the end that reads: "This certifies that this application was completed by me, and that all entries on it and information in it are true and complete to the best of my knowledge."
Before the application is submitted, the carrier must tell the applicant that previous employers will be contacted to check their safety performance history. Section 391.23 also requires notice of the driver's rights over that information "via the application form or other written document prior to any hiring decision". Put these notices on the form, before the submit button.
An online form can work. Section 390.32 says anyone required to sign a document under these rules "may use an electronic signature", but electronic records do not qualify if they lack "proof of consent to use electronically generated records or documents". So add a consent step, and make sure you can store and reproduce each completed application.
A short "quick apply" form is fine for a first contact, as long as the full application comes before the driver drives for you. The form asks for a social security number and date of birth, so serve it only over HTTPS, never send answers by plain email, and limit who can see them (see our guides to HTTPS and privacy basics). If you order background reports from a reporting company, the FTC notes that the disclosure "must be in writing and in a stand-alone format. The notice can’t be in an employment application." Keep that notice separate from the form.
Templates, design and examples
A template can be a fine start if it lets you build the two paths, a real quote form and job pages without workarounds. In our view the things to check are speed on a phone in a truck stop, a header with both calls to action, forms that post securely to a place you control, and room for your own photos. Look at examples from carriers your size in your freight type, and note how quickly each one answers "do you haul my load?" and "what does this job pay?". If you want help, see our website development service.
A short checklist (our view)
- Two clear paths from the header: quote and drive.
- A page or section per freight type you haul, with lanes and equipment.
- A short quote form and a tap-to-call dispatch number on every shipper page.
- Legal name, USDOT number and MC number as text, matching your FMCSA record.
- Driver pages that state pay, home time and requirements, one page per opening.
- An application with the items in 391.21, the employer-check and rights notices, and an e-signature consent step.
- HTTPS, limited access to applicant data, and any background check disclosure kept separate.
- No ratings, certificates or figures you cannot back up.
Related guides: moving company websites, staffing agency websites, B2B lead generation and local business schema. See all our services.
Frequently asked questions
Does a trucking company have to show its USDOT number on its website?
The federal rule we read, 49 CFR 390.21, requires the carrier's name and USDOT number on both sides of the truck. We did not find a federal rule requiring it on a general freight carrier's website, though household goods movers have advertising rules. Showing it is still a good idea, because shippers can look it up on FMCSA's SAFER Company Snapshot.
Can drivers apply and sign online?
Yes. 49 CFR 390.32 allows electronic signatures for documents required under the FMCSA rules, as long as the records can be retained and reproduced and include proof of consent to electronic records. The full application must still contain everything 49 CFR 391.21 lists.
What must a truck driver application include?
Among other items: the applicant's identity and addresses for 3 years, licenses, driving experience and equipment, accidents and violations for 3 years, past employers with reasons for leaving, extra commercial driving history for CDL drivers, and a signed certification that the answers are true and complete.
Should the website have separate pages for shippers and drivers?
In our view, yes. Shippers want freight types, lanes, equipment and a quote form; drivers want pay, home time and an application. Two clear paths from the header serve both better than one mixed page.